Joined: 18/8/2004 Diamond Member 
Forum Posts: 2582
| Site Reviews Total: | 21 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hello, check the Yahoo Dandy Group for my plans for fitting them based on scrap tailgate lifts from 2 x Rover 25s. Cost - £10 plus a bit of garage engineering that a couple of bottles of wine will get you done by someone with a welding set. Two on each bed are best, one will help turn the bed over, but they do put a bit of strain ion the hinges. I STRONGLY RECCOMEND drilling out the Aluminium bed hinge pop-rivets & replacing them with Stainless Steel ones. Mine sheared on one corner wrecking the plywood bed base whilst in France during May this year. Fine once repaired, but this could have been much worse.
Steve.
------------- Steve.
|