Joined: 18/8/2004 Diamond Member 
Forum Posts: 2582
| Site Reviews Total: | 21 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
The tow bar bit is really straightforward. You are expected to have the correct mounting points used, bolts tight etc. The allowance for corrosion is surprisingly slack, can't remember the figure, but it isn't hard to find.
Anyone who drives with a trailer that is rusted to bits, with cracked or bald tyres or no brakes ought to be off the road. Other obvious points are mudguards fitted & working, lights that work, a number plate so the speed camera people can work out where to send the penalty notice. Nuts & bolts all tight & any load securely fastened on. Wheel bearings that aren't worn or seized, as well as the hitch working properly all also would seem worth checking. I
'm pretty sure there was a rule brought in a few years ago about plates for loaded & unloaded weight that had to be fitted from a certain date. I know mine was built before that came in. I'd also guess that any new trailers would need a CE mark to be imported or sold to say it complies with whatever European dictat governs trailer construction.
Steve.
|