Message Forums

Have just been for our first trip away, but we couldnt get the water pump to work.

I am presuming you just plug it in the slot, put other end in the water container and put your foot on the button!

It didnt make any noise or bring up any water.

Is there anything I should have done?

Is there any way to tell if the pump is working?

There seem to be quite a few second hand ones for sale on E bay, so think I will get one to see.

There is a switch on the Cruiser to switch the power on to the water pump. It tends to be on the seat the same side as the cooker/fridge and on our old one it was the switch closest to the cooker unit. The reason for the switch, is so that you are not constantly walking around the camper and standing on the foot switch and then pumping water into the sink.

Hope that helps, if not check that all the wiring is connected.