Joined: 06/10/2008 Silver Member 
Forum Posts: 111
| Site Reviews Total: | 16 |
|
| Site Reviews 2026: | 1 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 1 |
| Site Reviews 2023: | 1 |
| Site Reviews 2022: | 3 |
| Site Reviews 2021: | 2 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 4 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 3 |
| Site Nights 2023: | 3 |
| Site Nights 2022: | 8 |
| Site Nights 2021: | 10 |
| Site Nights 2020: | 0 |
|
Hi all
My problem!
I had to replace the above recently as the previous one had failed - but its not working as it should
I have a Whale WH1302 water heater and a Whale water master pump.
Prior to installing the new valve (very easy - two push fits) I descaled the tank.
I filled the water, turned the taps on and all went well and the pump stopped a few seconds after I turned the taps off. I waited and a few seconds later, the pump burst in and deposited drops of water out of the new valve. Every 10 seconds or so after that. It can be a few minutes or maybe half an hour before the pump kicks in again.
What’s wrong? I can’t think of anything other than it’s the pump playing up. Or am I missing something?
I know there are some tech wizards out there and I await their solutions.
Many thanks in advance
|
Topic: Whale drain/pressure valve
via mobile 22/7/2025 at 4:04pm
