Can anyone help please? We have a Teleco Teleplus AT36 on our motorhome. It has worked perfectly since we bought the motorhome in April, but now we can't get a signal in areas that we know we've had a signal before. Even at home where we've always managed to get one but now can't.
I've re-tuned and can get a fuzzy analogue with speech, but the Digital channels are non existent. Have tuned both TV's into digital indoors and no problems so nothing wrong with either TV in the motorhome.
I have a signal strength indicator on the tv and the best signal I can obtain is 47% but with 0% quality
Is it possible that the transmitter has packed up?
The red light is on on the aerial and if I move it about it changes the signal percentage but never the quality, whereas before we had a perfect picture
Not sure what system you are using but usually a problem like this I due to either poor connections so check all connectors are secure and connected to the wire properly or it's an alignment problem which I don't think it is in this case as I assume you don't have to align a dish or anything. One other thing is to check the connection on a joiner if you have one. Sorry can't help other than that.
Good luck
We couldn't get digital with our status aerial and only a fuzzy analogue one. We now use an ordinary (cheapest from Argos) old style one. Usually get a good digital reception. Also use the same kind at home. So far so good but we don't go digital 'til November. Hope we've saved money by not buying expensive systems.
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.