Message Forums

Mornin'..

Just had a bit of a squint at some online photos of vans(using your model designation)and of the ones I can see, the waste pipe "appears" to be a decent enough size and easy to get at.? (..behind the rear wheel on the N/S?)

So identifying a suitable tap shouldn't be too difficult..

(..I had visions of the previous owner having just bust the tap from out of the side of the tank.....).

Hi again..

The photos I found weren't clear enough to tell what the actual fitting/fitment was on the end. But as for what it "should" look like, it could be any number of things..

(For that,  it may be worth contacting a forum mod to see if you can add "Bessacar 425" and it's year, into the thread title? and/or it may be worth asking on "make specific" forum/website?)

What it " looks like now"  is probably as/more relevant though (ie: is there a threaded fitting on the end? is it a bare/raw pipe end? etc),as knowing that, you can just get something to fit what "is" there...(rather than "what used to be there, before the previous owner unscrewed  or cut it off it.."  )

Some examples:

http://www.ebay.co.uk/bhp/motorhome-waste-water-tap?&mkcid=1&mkrid=710-53481-19255-0&siteid=3&campid=5339172918&customid=&toolid=10001&mkevt=1

http://www.leisureshopdirect.com/caravan/water/waste_fittings.aspx

(..various drain taps should be available, for not much more, from a caravan/motorhome spares outlet..and as said, I used a plastic "pond" tap on one of our vans).