Joined: 09/9/2019 Standard Member
Forum Posts: 2
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi I've been reading through comment and have identified, someone who had a similar problem with a Carver 3600A heater.
The lower rod connection is missing the grub screw - does anyone know what the size the grub screw should be? (3.5mm) However; is 3.5mm the gauge with the length being -?mm
On this web site it identifies suppliers, but I can't find any grub screws at 3.5mm?
As I have read the grub screw requires to sit flush in the lower rod connection unit, so the length obviously matters...
Any help is greatly appreciated, thanks!
|
Topic: Gas heater
