Message Forums

Hi Wizard,

I've just sent an email to your link requesting the details as well.

I hope that you don't mind but you're a life saver!

I've been trying to release the ratchet since the first time I locked it on, (we've only had the caravan for 6 weeks).

Kind regards,

Andy

On the way to you now Andy .

atb

Wizard

Quote: Originally posted by FlyFifer on 10/5/2011

---

Hello Wizard

Could you send me details too as mislaid mines thanks

Does it show you how to change the pads too

---

You'll need to send me a email or let me know your email address so i can email them to you .

atb

Wizard

Hi Wizard,

Sorry to pester you but I need to ask for your expert advice again...

I've just been to 'adjust' the alko 1300 as it had seized. I used a small hammer and gave it several taps and it eventually unseized. I unscrewed the adjusting side and it came away, allowing me to remove the plunger but I can only find one circlip. I've put it all back together and it tightens until it clicks and then it will undo again, which it wouldn't before. However, I've only got the one circlip at the end of the plunger now. In the replacement kits, it shows 2 circlips for each plunger but not sure if there's one spare or if I've lost one. The stuff you sent me only shows one retaining ring so not sure what to do now...

Thanks again,

Andy

Hi Andy , sorry can't be of much help as i don't have a Alko 1300 , just the info i've saved over the years . Try doing a post in the Caravans section of this forum and see if some can give you the answer .

atb

Wizard

Quote: Originally posted by dodger936 on 21/5/2011

---

Hi Wizard,

Sorry to pester you but I need to ask for your expert advice again...

I've just been to 'adjust' the alko 1300 as it had seized. I used a small hammer and gave it several taps and it eventually unseized. I unscrewed the adjusting side and it came away, allowing me to remove the plunger but I can only find one circlip. I've put it all back together and it tightens until it clicks and then it will undo again, which it wouldn't before. However, I've only got the one circlip at the end of the plunger now. In the replacement kits, it shows 2 circlips for each plunger but not sure if there's one spare or if I've lost one. The stuff you sent me only shows one retaining ring so not sure what to do now...

Thanks again,

Andy

---

Hi Wizard,

have been searching for a solution to this problem (stuck ratchet),would be delighted if you could mail me the fix for this problem,

Kind regards,

Freddie.

Quote: Originally posted by cantona777 on 06/6/2011

---

Hi Wizard,

have been searching for a solution to this problem (stuck ratchet),would be delighted if you could mail me the fix for this problem,

 

Kind regards,

Freddie.

---

You'll need to send me a email ( email link below ) so i can email the info to you .

atb

Wizard

Just a thank you to (Wizard) for a speedy reply to my problem,

very much obliged,

Freddie.