Hi, I've just had a towbar and 13-pin socket fitted to my Honda civic, for towing our caravan.
The socket is tucked right under the car and very tight to the bottom of the car. As a result the spring cap barely clears the socket, inserting and turning the caravan plug is beastly hard and takes the skin off my knuckles!
Ideally, a really short and rigid extension of about 4 inches would do the job, effectively bringing the socket out into daylight.
I've scoured the web and can't find anything like this, only extension cables which I don't need.
I'd be grateful for any suggestions to make this easier....
That makes it easy to feel where the plug should be to enter it into the socket. I can then push on the disc to turn it either to plug in or unplug. I wasn't happy with the position at first, but doing it a few times I now find it easy.
Just a thought! Mine is 'under the car' and attached to the fixed part of a 'removable' tow bar, but hinges down into a more accessible position for use, and obviously hinges back out of harms way when not required!
It's still a bit of fit by feel even when rotated into lower position though, unless you like standing on your head!
I permanently carry a door mat, in my case for fitting/unfitting the removable towball, but would be ideal if as you say, 'under' the car. Saves messing the trouser knees.
Also in my case, the socket simply pulls/swings down adjacent to the towball. When not in use, you'd not know there was a towbar installed.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets