Joined: 10/6/2005 Silver Member 
Forum Posts: 110
| Site Reviews Total: | 3 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi, the 3 screws? holding the kitchen sink on my Unicorn 3 Vigo (although I would think that all Unicorn 3's are similar) are really rusty and I would like to replace them. The heads of the holding pins/screws are domed, so cannot use a screwdriver to loosen them and they each go into an L bracket under the worktop. I can drill the heads off the pins/screws to remove them but has anybody either replaced these or had to remove the sink and if so, what did you replace them with? I have looked on Bailey parts online and they list the sink but not the screws.
Kind Regards Roy
|
Topic: Bailey Unicorn 111 Vigo kitchen sink.
