Hello first time on site I have just purchased 2015 swift eccles with a endurance purple line already fitted but having trouble with the remote it moves the van forwards left and right and will turn on its own axle but it will not move the van backwards when you press the button to move it back the van moves sideways any ideas anyone thanks
Quote: Originally posted by albee on 09/6/2015
Hi had our mover 5yrs now and I still forget to switch on at master switch sometimes. there I,am all excited to go and a false start, much to the amusement of the kids and cries of do you want me to do it dad.
Quote: Originally posted by Norm1957 on 28/9/2022
Hello first time on site I have just purchased 2015 swift eccles with a endurance purple line already fitted but having trouble with the remote it moves the van forwards left and right and will turn on its own axle but it will not move the van backwards when you press the button to move it back the van moves sideways any ideas anyone thanks
not got this mover but have you tried repairing the handset to the receiver to see if that sorts it.Instructions should be in operating instructions if you have them if not try ringing purpleline.
Apparently you press the reset button on back of the receiver for about 5 seconds and red led will flash quickly. Press red button on remote twice, the led will flash more slowly indicating pairing is complete. Then test remote with movers off the wheel to ensure its operating as the buttons pressed ask for.
Post last edited on 28/09/2022 10:13:09
------------- 74,going on 25
Beauty is in the eye of the beerholder
It looks like only one side will drive backwards. It could be that one of the relays has some dodgy contacts and needs replacing, or perhaps one of the roller bearings has collapsed a bit internally and jams in reverse, or worst still that the problem is in the gearbox.
Listen for a click from the relay with the correct command forward and back, if they are there try the next easiest and cheapest fix.
Turn the offending roller without a load, just running free. If it still duesnt turn, try removing the roller, can you see the pin inside turn or is it broken on one side?
Let us know howe you get on.
Dave.
------------- Never argue with an idiot, they will drag you down to their level and beat you on experience.
Mark Twain.
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.
Topic: Enduro motor mover trouble: help please
via mobile 28/9/2022 at 12:00am
