Message Forums

hi all can anyone help my old lurar has a problem with the out side of the floor delaminating is there something i con treat this with to stop it from getting any worse it is the out side underside of the van

help albert

here

http://www.1carpc.co.uk/wcdr/delamination.htm

hi its a sandwich construction,thin ply on top,foam centre,thin ply bottom.the assembly is the same so as to bring all three back together as one.

-----------------------------------------ply

             foam/foam

------------------------------------------ply

Quote: Originally posted by acromarty on 06/7/2008

---

thanks for your reply michael but is only the underside of the plywood under the van not the inside

---

Hi Albert , welcome to UKCS , i would treat it from inside , and drill down further without drilling right thro , place timbers underneath to support the floor ( just enough to take the sag out , don't force the floor up ). Then inject thro the holes drilled inside .
See Just had a go at delamination! (repair)

atb

Wizard