Can anyone please help??? Yesterday the fanmaster was working fine blowing air around my caravan and today, nothing! The green lights on teh thermostat and control panel wont go firm and remains flashing on all settings, even just the fan alone. There is 240v getting to the fanmaster. Any ideas?
Always makes me laugh when it says under ACTION 'Replace PCB' why not repair or replace?
To me these fault finders are simply out to maximise the sales of spares.
Anyway this is probably the action needed here, repair that is! but the first reason for the light to continue flashing is low battery voltage so check that.
If the pcb is indeed faulty, then I'd also replace the fan motor at the same time as this will have most likely caused the fault on the pcb.
Generally pcb faults are proceeded by a noisy fan? this is due to worn bearings and the extra load this causes overloads the pcb, in some cases it's also possible it's damaged the control switch.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets
Topic: Carver Fanmaster not working
