Message Forums

Yep new wall baords are what you need now , see this wall board supplier links http://www.1carpc.co.uk/wcdr/wall-boards.htm to find a match for what's in your caravan on the other walls .

atb

Wizard

It doesn't have to be laminated , you could stick on wall paper . The wood you want is 3mm plywood , you'll probably find the thinest you can get is 3.6mm , this will be ok , but i would try to avoid going thicker .
Stick the wall boards with Evogrip ( non solvent type ) from B&Q .
To be honest the caravan wall board will give you a really nice job if you can get a match .

atb

Wizard

hi there, new to this site so here goes.

the best advise i can offer from working with a PRO is, use wallboard available from O,LEARYS at beverly near  HULL, maybe somewhere closer though not sure ,have only used O.LEARYS.

cant realy comment on usual plywood, though wallboard is only coated ply!!!

some  adhesives used by the trade are from LEASUREPLUS { easy found on the web } as it forms part of the vans structure,

it comes in 2 parts and,takes trial and error to judge how much to mix for what you can fit in what time.

there is a certain amount of time to possition the board before it goes off, again trial and error.a nice even coating with a spreader, a piece of scrap plastic does nice and, make sure the area you are fitting to is clean of all loose stuff.make

sure you clean off any surplus glue from tools etc,

 YOU WONT SHIFT IT AFTER ITS GONE OFF  GUARANTEED !!!!

hope this helps.