I have just purchased a Truma Ultraflow conversion to replace my Crystal 2, There are two pipes attached to my crystal one for the kitchen taps and bathroom sink / shower.and one to my Carver hot water tank. Do i cut one of the blank pipes on the truma or do i put a T-piece in to the pipework to supply the tank.
When I did my conversion, mine already had a T piece installed, but had to put a new non return valve between the T piece and the back of the new housing as this new one has not got one combined as did the old Crystal housing. I just left the other blanked off pipe as it was and fitted the outer plug cap to it`s outer opening, hope this makes sense.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets