Joined: 02/12/2003 Diamond Member 
Forum Posts: 4375
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
It does not need to be on the heater to test it, disconnect it so you have it in your hand
Now use a screwdriver to short out the two pin connections that attach to the wires to the switch in the gas valve. This should get it to click, (spark), don't get your hand near the third connection on the back then!!
If it still does not spark then hopefully it's a battery connection problem, now it's in your hand, this should be plain to see, clean off any corrosion and try again.
If it still does not work then I'm afraid it needs replacing and their not cheap!
|
Topic: Truma ignition problem
