Insurance Quotes

Advertisement

Message Forums

Welcome Guest Register  Log In  Search  Latest Posts
 Reception - All Forums
   Caravans and Caravanning -  Caravan Repairs, Servicing and Maintenance
Share   Post on X / Twitter  Share on Facebook  Email
Subject Topic: Leaking Reich Water Tap
Post Reply
04/12/2012 at 4:29am
 Location: Newport Gwent
 Outfit: Adria Adora 542DL FordSMax
View themeldrews's Profile View Profile   Reply to themeldrews Reply   Quote themeldrews Quote  
Joined: 30/3/2006

Gold Member
Gold Member

Forum Posts:   434

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

I have a leaking Reich water tap.

Its a fold down mixer( microswitch not wired).

I have checked out spares but they are pricey.So would it be better to replace the tap not cheap)rather than changing parts of it.

I am unable to find any installation instructions anywhere for these taps.

Any advice would be appreciated as we are due to use the van over Xmas

Regards

Terry



04/12/2012 at 10:11am
 Location: 
 Outfit: 
View birdman101's Profile View Profile   Reply to birdman101 Reply   Quote birdman101 Quote  
Joined: 30/8/2011

Diamond Member
Diamond Member

Forum Posts:   2829

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

If it is like these i change spout which leaked but finnish up buying new tap.Easy to change got at mine by removing fridge vent undo nut underneath and connectors.Links may be of use
http://www.leisureshopdirect.com/caravan/home/Reich_Taps/Spares_for_Reich_Taps.aspx http://www.ebay.co.uk/itm/CARAVAN-REICH-TWIST-SINGLE-LEVER-MIXER-TAP-IN-MATT-LEFT-HAND-/181021493511?pt=UK_Campervan_Caravan_Accessories&hash=item2a25b8c907&mkcid=1&mkrid=710-53481-19255-0&siteid=3&campid=5339172918&customid=&toolid=10001&mkevt=1 http://www.ebay.co.uk/itm/CARAVAN-REICH-TWIST-SINGLE-LEVER-MIXER-TAP-IN-MATT-RIGHT-HAND-/400338299980?pt=UK_Campervan_Caravan_Accessories&hash=item5d3605ac4c&mkcid=1&mkrid=710-53481-19255-0&siteid=3&campid=5339172918&customid=&toolid=10001&mkevt=1

Post last edited on 04/12/2012 10:20:54

Post last edited on 04/12/2012 10:23:51

* This post contains affiliate links. If you click through and make a purchase, as an eBay Partner Network member we may earn a commission from qualifying purchases, at no extra cost to you.


04/12/2012 at 10:46am
 Location: Lancashire
 Outfit: Caravan now Sold
View michael's Profile View Profile   Reply to michael Reply   Quote michael Quote  
Joined: 30/6/2002

Diamond Member
Diamond Member

Forum Posts:   23517

Site Reviews Total: 1
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

may help

http://www.myidealcaravan.co.uk/microswitch.html



-------------
the only silly question is the one you do not ask.


07/12/2012 at 7:01pm
 Location: Newport Gwent
 Outfit: Adria Adora 542DL FordSMax
View themeldrews's Profile View Profile   Reply to themeldrews Reply   Quote themeldrews Quote  
Joined: 30/3/2006

Gold Member
Gold Member

Forum Posts:   434

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

Many thanks for the replies.

I have found a source for replacement(in my local dealer would you believe)

I have looked at this tap- its in the bathroom to work out how it is fitted.

There is a large black plastic back nut i dont know the size of this nut.

There appear to be  2 flexible connectors held in by what looks like spring clips.

I would appreciate any tips to change this tap birdman

Regards

Terry

 

 



07/12/2012 at 10:26pm
 Location: Lancashire
 Outfit: Caravan now Sold
View michael's Profile View Profile   Reply to michael Reply   Quote michael Quote  
Joined: 30/6/2002

Diamond Member
Diamond Member

Forum Posts:   23517

Site Reviews Total: 1
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

may help page 26

http://assets.swiftgroup.co.uk/uploads/HandBooks/caravans/Previous%20Tourer%20Handbooks/1048547%20Caravan%20Owners%20Hbook%202003.pdf



-------------
the only silly question is the one you do not ask.


Advertisement

Roofbox


08/12/2012 at 7:43am
 Location: Hampshire
 Outfit: Hymer Nova S
View JTQU's Profile View Profile   Reply to JTQU Reply   Quote JTQU Quote  
Joined: 01/11/2005

Diamond Member
Diamond Member

Forum Posts:   2193

Site Reviews Total: 6
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

I think you can replace the cartridge in Reich taps without removing the tap but have not done that myself.
Access is started by prising out the coloured push in plastic plug in the top.

I have though removed the taps and replaced them. Yes you undo that black plastic nut[some have been brass]. In my case access was very restricted so I made a 5/16" ply disc about 2.5" dia into which I cut [fret-saw] the requisite "open-end" spanner profile. Sorry I cant remember the size but its an odd figure like 41, 43 or 47 mm across flats. It could be easier if you measure a spare in the accessory shop first. Thankfully the nut was not tight just too tight for my finger ends without the "spanner". Dont do it up tight afterwards as it and tap are only plastic.
With the tap now able to be draw up slightly off the surface with the slack in the pipes I could access the pipe couplings. The pipes go into the tap with plastic ends. On the tap down near these plastic ends you will see there is a pin about 2mm dia pushed through the tap body, effectively between the plastic pipe ends. Pushing out that pin releases the two plastic pipe ends from the tap body. Watch that you don't drop that pin.
Once realised how it is done you will appreciate it is a very neat way of doing it, the nose of the plastic couplings being fitted with the o-rings to seal the water.
For info, in birdmans link you will see these pipe end couplings as spares, the red and blue items. Here they show cranked ones but some are straight. I have had both stainless and plastic "pins" in the past.
If I get time I will see if I can find and measure my spanner.


08/12/2012 at 10:28am
 Location: Hampshire
 Outfit: Hymer Nova S
View JTQU's Profile View Profile   Reply to JTQU Reply   Quote JTQU Quote  
Joined: 01/11/2005

Diamond Member
Diamond Member

Forum Posts:   2193

Site Reviews Total: 6
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

I cant find the spanner sorry but have taken some pictures of Reich tat pipe removal that I will put up this evening when back home.


08/12/2012 at 5:55pm
 Location: Hampshire
 Outfit: Hymer Nova S
View JTQU's Profile View Profile   Reply to JTQU Reply   Quote JTQU Quote  
Joined: 01/11/2005

Diamond Member
Diamond Member

Forum Posts:   2193

Site Reviews Total: 6
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

Whilst not your tap below is the compact Reich Shower Mixer. This has a smaller mounting thread and nut but shares the technique for fixing the water feeds.
As I described earlier all you need to do is push out the stainless steel pin then you can pull out the two water feeds. These remain fixed on the pipe and on reassembly with that tap or a replacement tap are simply pushed back in place and the pin reinserted. Hope this helps.



09/12/2012 at 10:32am
 Location: Hampshire
 Outfit: Hymer Nova S
View JTQU's Profile View Profile   Reply to JTQU Reply   Quote JTQU Quote  
Joined: 01/11/2005

Diamond Member
Diamond Member

Forum Posts:   2193

Site Reviews Total: 6
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

Now found both nuts to measure.
Reich tap nuts across flats sizes are 46 mm for the larger series and 32 mm for the compact ones.


10/12/2012 at 6:22pm
 Location: Newport Gwent
 Outfit: Adria Adora 542DL FordSMax
View themeldrews's Profile View Profile   Reply to themeldrews Reply   Quote themeldrews Quote  
Joined: 30/3/2006

Gold Member
Gold Member

Forum Posts:   434

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

Many thanks JTQU and all who offered advice.

I have now sussed out the existing tap and compared it with the new one.

These taps dont appear to have the stainless steel pin shown on yours but the

underside is otherwise identical.

I cant move the back nut by hand but i have a small stilson wrench that may fit.

I will try the tap when we are away to try and trace where the service person said it

leaked.I cant see any crack or fault anywhere.If it leaks i will replace it.

Cheers

Terry

 

 

 




In order to post a reply you will need to register, or if already registered please log in here

Prev       Next
Quick Links - All Forums - Caravan Repairs, Servicing and Maintenance - Top of Page

     Share   Post on X / Twitter  Share on Facebook  Email


Latest News, Discounts and Competitions  see all...












    Upcoming Event

UKCS Meet Motorhome and Campervan Show Exeter 20/11 to 22/11

A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets


3210 Visitors online !

Free UKCampsite.co.uk Window Sticker  -  Add a Missing Campsite

[Message Forums]  [Caravan Sites & Camping]  [Company Listings]  [Features / Advice]  [Virtual Brochure]  [Special Offers]
[Reception]  [Competitions]  [Caravans & Motorhomes For Sale]  [Event Diary]  [Tent Reviews] 

[Contact Us] 



Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2026


Advertisement


Advertisement

Advertisement