Joined: 02/3/2008 Silver Member 
Forum Posts: 158
| Site Reviews Total: | 1 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
It could be the fuse on the PCB (printed circuit board) which is inside the grey plastic cover which goes over the water heater. It is a glass fuse cant remember ampage, we replaced ours with one we got from maplin (also bought a spare in case it goes again) Just go careful with greasy fingers around PCB. It cost us pence to fix but thought it was worth a shot before calling in an engineer to condemn the whole board!!! Replaced this fuse 4 years ago and not a problem since. Regards Janette
|
Topic: Truma water heater has no light
