Joined: 04/4/2007 Gold Member 
Forum Posts: 287
| Site Reviews Total: | 13 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
having previously repaired our motorhome which is documented herewe attached the outer skin to polystyrene with pu adhesive,
HOWEVER
2 years later the skin has come away from the polystyrene in places which has given the outside appearance a rippled effect,
what i am thinking is take the window out and rubber off and get a glue poured in the lower section as obviously i dont think a caulking gun and a tube of sealant would get to the bottom but i do think i could do this on the upper skin [above window]
can anyone recommend a non solvent quick setting contact adhesive type stuff that could be poured in so that it covers most of the area?
thanks in advance
|
Topic: polystyrene to outer skin
