Hi guys, I have a slight problem with condensation in our caravan, the guy who had it before us bodged a skylight fitting and as this doesn't leak I'm pretty sure some else is wrong as there is still water dripping down by the sky light? I have resealed the outside of the sky light so I know that it's not that. And he has replaced a lot of the roof (3mm ply wood and polystyrene) and between the wood and the metal skin of the caravan is where the condensation is coming from. Is there a way to stop this or do I have to rip out the roof and start again but stick the wood to the metal? Thanks in advance.
It's a new skylight so I'm sure the screws are fine, I did check them to make sure. I think your right about sticking the wood to the metal as it's not stuck to it at the moment ? Might take out all the guy did and do it properly. Any adhesive I should look out for or should I just use the adhesive you can get in a spray can from b&q? I know the polystyrene is new. We have 3 windows open on the mid setting as well as a dehumidifier running when were not in the van. I noticed a drip from the skylight so I took the inner casing off to find a wet patch on the wood so I pushed it and some water came out. Thanks for the reply guys.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets
Topic: Roof condensation?
