Joined: 02/7/2006 Diamond Member 
Forum Posts: 1602
| Site Reviews Total: | 6 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
I looked into this but was advised by my local dealer to check clearances etc in the cupboard below to make sure the crank etc will fit ok, in my case it looked like it would be too close to the side wall so you wouldn't be able to turn the crank handle, the dealer could easily sold me one but gave me good advise first, try your nearest dealer. good luck
|