Hi folks. Got new plastic insert for between the rubbers if the caravan window. Any tips for installing the plastic strip? I don't have the special tool.😞
When you do it try to compress the joint as much as you can i.e. cut it over length as it will shrink and leave a gap if you don't of that you can be certain, and use plenty of lubricant to avoid stretching it when fitting.
Thanks for all the advice folks. I tried washing up liquid but it makes such a mess. Maybe I was using too much. The rubber is really tough to lift up on the opposite side with insert fitted. Am i doing something wrong?
I have found that if u use one of the aluminium beer bottle openers it does help lift it up but it's a slow job.
Old plastic nectar card to lift the rubber slightly to help the trim seat itself, Afer about 12feet though the card may break. Mine did. I just trimmed it down and carried on.
Thanks folks for all your wisdom, experience and patience. I have finally finished the installation of the insert and windows. 👍😀👍😀. Next job on the list get some blinds up. I will open a separate issue on this. I am nearing ready for our first outing in the van after some serious rebuilding following heavy damp and rot find.
A big thank you to all for all your individual inputs to get me to this point.😁👍👍👍👍
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets