Hi everyone, I'm about to embark on the rebuild having repaired just about everything on my list. I was waiting for it to rain heavily first so i could make sure that everything was water tight, however I found that some water was still getting. I have traced it to the panel joint that runs the length of the van about a third of the way up. The outside rail is riveted to the panels. The question is what is the best way to repair the leak?
I was planning on drilling out the rivets, cleaning the old mastic off and resealing, but how to fit the rail back on? rivet it or screw it? If I use screws would it be better to fit a wood baton behind it?
Do I GRP over the joint on the inside as it's exposed?
If there is, or you can fit, a wooden batten behind the join I would screw the panels back in case the problem returns at a later date, but if there is no batten or you cannot fit one you will need to use rivets again.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets