Joined: 04/1/2019 Standard Member
Forum Posts: 18
| Site Reviews Total: | 1 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 1 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 8 |
| Site Nights 2020: | 0 |
|
Hi all
Had a little mishap with an awning pole and the fly screen mesh on my roof vent, needless to say I had a big rip in the mesh and another problem to resolve.
Searched Ebay for a replacement vent screen and couldn't find one that matched the dimensions, so decided to have a go at fitting the mesh to my existing screen.
Found this
https://www.ebay.co.uk/itm/Quality-Fibreglass-Screen-Mesh-Net-Insect-Fly-Mosquito-........ and ordered 40cm x 80cm for the princely sum of £1.99, I removed the old mesh and dressed off the edging on the screen housing. I then placed the mesh over the housing and secured it with clothes pegs on one side, I then applied FloPlast Solvent cement that I already had in my van and pasted on over the mesh where it touched the housing with a small hobby brush and left it to dry.
It's as good as new now and looking good
* This post contains affiliate links. If you click through and make a purchase, as an eBay Partner Network member we may earn a commission from qualifying purchases, at no extra cost to you.
|
Topic: Cheap Fly Screen fix
