Insurance Quotes

Advertisement

Message Forums

Welcome Guest Register  Log In  Search  Latest Posts
 Reception - All Forums
   Caravans and Caravanning -  Caravan Repairs, Servicing and Maintenance
Share   Post on X / Twitter  Share on Facebook  Email
Subject Topic: Removing rusty screws
Post Reply
via mobile 27/6/2019 at 12:42pm
 Location: cambs
 Outfit: Roller Team Zafiro 696
View CatieB's Profile View Profile   Reply to CatieB Reply   Quote CatieB Quote  
Joined: 30/8/2010

Gold Member
Gold Member

Forum Posts:   366

Site Reviews Total: 5
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

I think I posted elsewhere about our window leaking. We want to remove it to let it dry etc. Have removed all the screws bar two. Very rusted. Have tried everything we can think of. Anyone any ideas?

Thanks

-------------
Now in a motorhome

Gone via tent to tourer to seasonal to camper van


27/6/2019 at 1:16pm
 Location: The foot hills of no
 Outfit:  A full biohazard su
View moppetsdad's Profile View Profile   Reply to moppetsdad Reply   Quote moppetsdad Quote  
Joined: 29/3/2009

Platinum Member
Platinum Member

Forum Posts:   1032
Tent Reviews:   1

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

If you have an electric soldering iron try holding the heated tip on the screw head for couple of minutes then try them, it often works or even give them a light tap with the screw driver in as though trying to knock a nail in but go steady hitting the screw driver end and of course mind you fingers.   

-------------
David

    

I've stood on Lego and didn't even cry!!


via mobile 27/6/2019 at 1:31pm
 Location: cambs
 Outfit: Roller Team Zafiro 696
View CatieB's Profile View Profile   Reply to CatieB Reply   Quote CatieB Quote  
Joined: 30/8/2010

Gold Member
Gold Member

Forum Posts:   366

Site Reviews Total: 5
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

We’ve tried the knocking, have done that a few times. And after wd40 too to no avail sadly. Don’t have a soldering iron but can see why that could work. Would it be a risk given the surround is all plastic though?

-------------
Now in a motorhome

Gone via tent to tourer to seasonal to camper van


27/6/2019 at 1:44pm
 Location: 
 Outfit: 
View woodman2's Profile View Profile   Reply to woodman2 Reply   Quote woodman2 Quote  
Joined: 17/12/2014

Platinum Member
Platinum Member

Forum Posts:   735

Site Reviews Total: 13
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 1 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 7

If you have a dremel drill or similar,you could try cutting a slot across the pozi head and then use a flat headed screwdriver.This could cause some damage to the surrounding plastic frame though.


27/6/2019 at 1:51pm
 Location: West Yorkshire
 Outfit: Bessacarr 835
View chrisn7's Profile View Profile   Reply to chrisn7 Reply   Quote chrisn7 Quote  
Joined: 10/9/2005

Platinum Member
Platinum Member

Forum Posts:   948

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

Screwdriver with a tip in good condition and 2 people. Apply plenty of pressure and undo torque while the other person strikes the end of the screwdriver (use a pound thru type if possible to avoid possible shattering of the handle). Bit like using an impact driver but less brutal. This might just crack it free, but the head might just shear off too since its rusty...

Sometimes a small ratchet with a screwdriver bit will do the job when a screwdriver won't, but plenty of pressure needed.


Advertisement



27/6/2019 at 3:44pm
 Location: None Entered
 Outfit: None Entered
View trog100's Profile View Profile   Reply to trog100 Reply   Quote trog100 Quote  
Joined: 27/6/2014

Diamond Member
Diamond Member

Forum Posts:   1755

Site Reviews Total: 0
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

plusgas is the stuff to use for rusty screws nuts and bolts.. wd40 isnt much good..

plusgas penetrates like magic..

trog


29/6/2019 at 3:07am
 Location: Midlands
 Outfit: Mondeo Avondale Gram
View Grampian91's Profile View Profile   Reply to Grampian91 Reply   Quote Grampian91 Quote  
Joined: 11/5/2008

Diamond Member
Diamond Member

Forum Posts:   6898

Site Reviews Total: 2
Site Reviews 2026: 0 
Site Reviews 2025: 0 
Site Reviews 2024: 0 
Site Reviews 2023: 0 
Site Reviews 2022: 0 
Site Reviews 2021: 0 
Site Reviews 2020: 0 
Site Nights 2026: 0
Site Nights 2025: 0
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0

Would the WD40 or Plusgas or similar cause the wood swell around the threads and have a tighter grip?

Drill the heads off and then use grips to remove whats left of the screw.

Good thing about drilling them off is that you often have a nice dish in the screw to act as a guide. Just use a drill bit slightly larger than the shaft of the screw, not the head.

You dont need to drill all the head away, a hole through the middle with separate it from the shaft.




In order to post a reply you will need to register, or if already registered please log in here

Prev       Next
Quick Links - All Forums - Caravan Repairs, Servicing and Maintenance - Top of Page

     Share   Post on X / Twitter  Share on Facebook  Email


Latest News, Discounts and Competitions  see all...












    Upcoming Event

UKCS Meet Motorhome and Campervan Show Exeter 20/11 to 22/11

A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets


4073 Visitors online !

Free UKCampsite.co.uk Window Sticker  -  Add a Missing Campsite

[Message Forums]  [Caravan Sites & Camping]  [Company Listings]  [Features / Advice]  [Virtual Brochure]  [Special Offers]
[Reception]  [Competitions]  [Caravans & Motorhomes For Sale]  [Event Diary]  [Tent Reviews] 

[Contact Us] 



Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2026


Advertisement


Advertisement

Advertisement