Joined: 23/2/2006 Diamond Member 
Forum Posts: 3117
| Site Reviews Total: | 11 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 3 |
| Site Reviews 2021: | 1 |
| Site Reviews 2020: | 2 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 11 |
| Site Nights 2021: | 5 |
| Site Nights 2020: | 9 |
|
One of mine did the same along three sides whilst in France. Luckily I had bought some Bison glue (like this) for another job. It is made especially for use on acrylic, ABS, and hard plastics.
Basically the join needs to be clean and dry, apply the adhesive, and clamp the join lightly together until it sets (Bulldog clips will do fine). It's been three years now and still good.
Dave.
* This post contains affiliate links. If you click through and make a purchase, as an eBay Partner Network member we may earn a commission from qualifying purchases, at no extra cost to you.
-------------
Never argue with an idiot, they will drag you down to their level and beat you on experience.
Mark Twain.
|
Topic: Delaminated window.
