OK so I have a truma water heater it works fine on the electric heats the water up lovely as it should.
The gas side isn't working at all I taken out the pcb and sent it away for repair, I now have it back they say its been fixed but still no joy.
I have checked there is 12v going to the board and I have checked the gas supply wich is all fine but yet I still get no gas sounds like it's lighting and no lights on the switch
I installed the board back into the heater but it's. Still not doing anything, anyone Who can help me with this I will be. Very great full thanks in advanced.
Did you try the Search facility? Here are some results that might be of help.
------------- XVI yes?
As well is two words!
How does a sage know everything about everything? or does he? or does he just think he does?
Remember, if you buy something you bought it, not brought it.
As well is two words!
How does a sage know everything about everything? or does he? or does he just think he does?
Remember, if you buy something you bought it, not brought it.
A update on this issue following me checking the. Continuity of the wires. From the switch and following the wires I found. There was a break in 1 of the cables so I put a new lead in and it work so well happy now. Thank you for your help
There's gonna be a electrical short somewhere if it's tripping test the wires and check there not all broken. The water pump will only work once u have the taps open they also have power connected to the taps to tell it to come on so check that and test all taps bathroom and kitchen etc
Quote: Originally posted by Michael Thayne on 03/5/2021
Hi I am currently on site and I have 2 problems. First water pump isn't working. Ghe fuse kept blowing but now when I put in a new fuse ,,,,nothing
Hi Michael, and welcome to the forum. It may have been better to have started a new post so it may get moved. However,...
The pumps Craig mentioned should work on 12volts, the fact that it has blown fuses and now doesn't do anything could suggest a jammed rotor but it have done a bit more damage.
I would suggest a voltmeter to check for voltage to it, but disconnect it from the circuit for now until you csn establish a feed, then try the pump and see what it does. Is the pump external, (in the aquaroll) or mounted in the van?
Dave.
------------- Never argue with an idiot, they will drag you down to their level and beat you on experience.
Mark Twain.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets
Topic: Truma ultrastore water problem
via mobile 19/4/2021 at 9:24pm
