I had some issues when fitting my Alko brackets too. I just moved it slightly out of the way and fitted them, I refitted the pipe brackets in the new position.
Dave.
------------- Never argue with an idiot, they will drag you down to their level and beat you on experience.
Mark Twain.
Hi Dave, Unfortunately I don't have that luxury I have a Bailey Magenta just not enough movement in the pipe it would mean flattening the pipe to get brkt on,
So I have decide to move the outlet pipe to just inside door
Regard
Phil (Sheffield)
Morning Dave, hole for pipe from heater that goes through the floor & under the van, taking a closer look the bracket would cover half the hole in the floor, so I think re routing to come out where I said through cabinet side is my best bet
Regards
Phil
Back in 2009 we bought a new Ranger GT and Bailey had run the heating duct just where I needed to fix mover motor. I cut another hole for duct to pass through on the other side of the chassis and covered existing hole with plywood. It seems as people who design caravans do not give much thought. Every caravan of the same model could not have had movers fitted without alteration.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets
Topic: Jacking points
via mobile 15/9/2021 at 11:36pm
