Joined: 25/4/2022 Standard Member
Forum Posts: 1
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi, I have a 2004 Elddis single Axle van, and the plywood floor has started to rot in the rear corners - probably due to the awning rail not being properly looped underneath causing the water to run onto the underside. I would like to know the repair methodology for sorting out the floor. I can’t cut out the floor completely as the galvanised metal frame for the stabilisers is in the way. I was thinking of hacking off the worst bits and then gluing and screwing new WBP plywood in its place before painting the h detailed of the floor?
|
Topic: Plywood floor delaminating
via mobile 25/4/2022 at 7:38pm
