Joined: 23/2/2006 Diamond Member 
Forum Posts: 3117
| Site Reviews Total: | 11 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 3 |
| Site Reviews 2021: | 1 |
| Site Reviews 2020: | 2 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 11 |
| Site Nights 2021: | 5 |
| Site Nights 2020: | 9 |
|
Have a look at the bearing in the roller, they didn't have any covers on to prevent water and dirt getting in. I had one that was collapsing in one direction and jamming. If so replace them on both sides with sealed ones, anso look to see that the roll pin in intact. I presume the battery is a good one?
If no joy, another thing to check is that the aerial signal isn't getting blocked by something metalic next to it, and that the spade connections to and from the control PCB are sound.
Dave.
-------------
Never argue with an idiot, they will drag you down to their level and beat you on experience.
Mark Twain.
|
Topic: Endura caravan mover (
Topic Closed)
via mobile 09/10/2022 at 3:54pm
