Joined: 10/10/2023 Standard Member
Forum Posts: 2
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|


Hi all. Hi all.
I'm in Australia and am looking for a Protempo or Knott wheel hub assembly.
It is from a 2001 Camplet Concorde and was hoping you could assist as these products or similar are not available in Australia.
PCD is 100m with M12 wheel studs with 70. 71 stud to stud, 1 inch shaft and a 60mm bore on a 10 inch wheel on 145/80R10 69S tyres. Bearings have ceased to the hub so can't confirm the bearing number but believe they are the OEM ones fitted at the factory.
Any help you can provide is appreciated.
|