I am trying to find replacement tent poles for a Vango Oregon 600 tent. It is the end section and the next section which I am looking for but I am not sure of the sizes. The sections measure 61 cm in length but I dont know where to take the width measurement from, is it the metal bit diameter or the fibre bit? I would be grateful for some advice.
------------- Sally10
Don't forget to leave a review of all tents you've used, for a chance to win fantastic prizes
You need the diameter of the fibreglass bit, and you can cut ant fibreglass pole to fit with a junior hacksaw and a bit of masking tape over the cutting line helps stop it splintering. they don't have to be vango poles, as long as they are correct diameter . You can get them from any camping shop, about £2 - £3 each section. or online if you don't have a campinshop nearby. just google tent spares.
------------- Debbie
Don't forget to leave a review of all tents you've used, for a chance to win fantastic prizes
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets
Topic: replacement Vango oregon poles
