Message Forums

Our relum is colour coded - which wasn;t in the instructions.  In fact the instructions were photocopied anyway and not very informative.

Our colour scheme is black to back, blue roof and green to red, red being the front section.

Your tent looks like ours and the only thing I find is to look at the back poles as they are the only ones that have 3 junctions (2 short bits and a one piece long bit), the long bits are the legs not the roof.  The front have four sections one of which is a stubby straight piece - where the front canopy poles clip too and again the longer part is the leg.  The Tent has 8 legs one in each corner (good start) and two in the middle which are separated by a smaller section.  I think the side sections are springed.  Lay what you believe to be the corners out and then add the middle poles checking the angles as not to get left and right mixed up.  Connect the poles, chuck the canvas over and then lift the tent up by slotting in the other leg poles each side.

The kitchen is 3 poles that clip onto the side poles and then the holes in the other end fit over the spiked legs - this is the bit I hate as it tends to collapse on my head! There are holes in the kitched canvas where the spikes are punched through.

You are better off getting a load of electrical tape and colour coding the poles - you can then type the details out and save on the old PC what colour goes where, and print a copy out whenever required.