Message Forums

Hi, Does anyone know of any good wheel clamps that will fit onto a caravan with a motormover?

We are thinking about getting the Nemesis one from purpleline but not sure if we can put it on backwards or if it will fit the right way round.

suggest you get the mover fitted first to see how much room you have round the wheel.see here

http://www.ukcampsite.co.uk/redirect.asp?redir=http://www.towsure.com/category/6847-Wheel_Clamps

ours is a ranger 500/5 and we use the BQD44 for a 14 inch wheel and there is just enough room to slip the top bit over the wheel.

http://www.western-towing.co.uk/acatalog/Wheel_Clamps.html

Thanks

ours is a ranger 460/2 so it should fit

Quote: Originally posted by weevle21 on 19/5/2010

---

Hi, Does anyone know of any good wheel clamps that will fit onto a caravan with a motormover?

We are thinking about getting the Nemesis one from purpleline but not sure if we can put it on backwards or if it will fit the right way round.

---

We have the BQD clamp as pictured above and it fits fine with our Reich mover, and is easy to get on and off as its in three smallish pieces.

Julia

Do you have the Alko receiver plate fitted? Even if you don't, perhaps you could go for the 'through the wheel' type like the Purpleline Excalibur then the mover doesn't get in the way.

Dave.

Quote: Originally posted by Pickled Onion on 20/5/2010

---

Do you have the Alko receiver plate fitted? Even if you don't, perhaps you could go for the 'through the wheel' type like the Purpleline Excalibur then the mover doesn't get in the way.

Dave.

---

I have a Bailey champaign with a powrtouch mover behind the wheels.My Nemesis will only fit on the nearside due to the mover blocking it on the door side . my millenco fits either side with no problem

you cannot fit a Nemesis the other way round

Thanks to everyone. Lots to choose from. Ours are steel wheels. Truma mover i think (from memory)

Which Milenco do you have Old chap?