We've bought a Cadac Safari Chef to use in France and Italy and after reading advice here we've also bought a quick release fitting (both parts). We want to be able to store the pipe away from the gas bottle and not have to keep taking it off and on the regulator.
Our regulator comes out of the propane and is a tail that you push a hose onto and secure with a jubilee clip.
The Cadac has a screw connector that has a tail that you push a hose onto and secure with a jubilee clip.
We realise that we must have to attach the quick release fitting female section to the bottle of gas somehow and the quick release fitting male section to the end of the hose from the Cadac.
However, the end of the quick release female section is a 1/4 inch BSP screw on connector and we have nowhere that such a connector will screw onto!
The connector looks like this:
Where do we connect the 1/4 BSP screw fitting to? I stood staring at the parts for a good few minutes at the weekend before realising there's something missing (or extra).
Any help appreciated.
-------------
Dora never went exploring but
|
Topic: Can`t work out Cadac connection
