Hi yall
Just went to my hobby delux with my altco stabiliser
When I watched instuction video it said 2 two bolts you fit it on with avvhre beside each other on bar on my hobby my one has one bolt on side anfd one through top this is the current configuration I tow with all the time. So do I fit the altco to same holes they are already present on the altco stabiliser so take bolts out replace with altco putting nuts in identical holes on torqueing to correct settings. Will this be ok to use it looks fine and is solid in center.so bolt is going horizontal and one going vertical through it.please advise looks fine but ss nuts not side by side as in video.i checked theres not two holes going in the side and original hitch was fitted exactly the same helllllllpppppp.
------------- hi to all
we have a hobby 6 berth single axle 1995-1997 23ft nose to nose.
my self and my good lady wife and four children love our van yes its old and we are doing it up bit by bit .i am disabled my good lady and children are my world.we love to talk me meet new people.
You are trying to fit an Al-ko stabilizer hitch to a Hobby that has a BPW chassis, yes? So you are correct, you bolt one horzontal & one vertical. Not familiar with BPW chassis but check that rear bolt also goes through hitch damper.
Thanks
Yes they wouldnt go through unless bith were aligned
Cheers both holes needed damper moving to locate thanks for reply
Your a star
------------- hi to all
we have a hobby 6 berth single axle 1995-1997 23ft nose to nose.
my self and my good lady wife and four children love our van yes its old and we are doing it up bit by bit .i am disabled my good lady and children are my world.we love to talk me meet new people.
A day of all things motorhome and campervan. The show is held both in the main indoor arena and across the grounds. Catering, hot drinks and food options are available. Easy access to the site and free parking included. Win one of five pairs of day tickets