is it possible to fit electric suppresors on the 12v system ie pump, florecent lights etc as we seem to get a bit of interference when watching our TV in the Evening
Thanks
Nick
------------- British by birth
English by the grace of God
Try some clip on ferrites on the power lead of your TV. look here That's probably easiest to fit.
Other commercial supressors are available which will involve cutting into an electrical line to fit. Can you describe the interference? is it kind of spots on the screen when you use the pump? If it is it is from the pump motor and you can fit one or 2 of the ferrites to the power lead for that. The flouresent lights should not really intefere with your TV.
the best way to supress something like a 12 Volt Motor is to fit a Capacitor (preferably an Electrolytic type) across the motor itself or the feed wires + to + feed and - to - feed as they are Polarity concious and can explode if connected the wrong way round, just make sure the capacitor is the same voltage as the load, this works by smoothing out the peaks in the supply, I would try something like a 1 Mfd Capacitor
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.
Topic: Suppressors
GROOVY BABY!!! GROOVY
, I would try something like a 1 Mfd Capacitor
