hi all just need some advise on fitting a used motor mover after looking at some videos on you tube ,on most caravan movers but not the Powrtouch Evolution theirs marks on them to find the center of the caravan the Powrtouch Evolution for some reason they don't have these fitting marks theirs none on the actuation bar either on the Powrtouch Evolution theirs no marks as a guide when fitting .if these marks are missing how do you find the center do i measure the whole bar then divide it or take measurements off the caravan chassis and then divide it.
I measured the bar and found the middle point, I put some masking tape around the bar and marked the central point. I did mark the bar the first time but it was difficult to see the mark on the black bar in the gloom underneath the caravan.
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.