Need help!
Whilst changing the faulty thermostat cut out on my Carver Cascade Rapide water heater, I removed the six wires from the relay, thinking I had labelled them correctly for refitting. When putting it back together, I find there are two additional terminals, I had not previously noticed. I am most reluctant to guess, as I think it would be all too easy to blow the relay by incorrect wiring, and new ones are probably unobtainable. Is there a wiring diagram available for this relay, or does anyone know the correct terminals for the wires? Tha van is a 2000 Abbey Vogue 416 GT with a Carver Cascade Rapide water heater
If you haven't found Gary at Arc Systems on line his number is 07901 544431. Gary is excellent and really knows what he is doing. I am sure he will be able to help you.
The two top relay connections are not used, so right side clockwise as fitted
*Spare
*Red to right side of element
*Orange to right side of bottom normal temp stat
*Red naked connector to right of upper over temp stat
*Blue naked connector
*Blue insulated connector
*Mauve to left side of element
*Spare
To complete the picture, that leaves the two direct Brown live connections too the left side of the stats, length dictates which is which but obviously does not matter anyway
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.
Topic: Carver Water Heater
