I don't have instructions to hand but the setup is really easy.
You should have the following parts:
1. The material.
2. Two poles of the same length.(One end should have a plastic cap and the other a metal end with a hole up the centre)
3. One longer pole.
4. Awning draught skirt.
First thread the material through the awning rail to the approximate position.
Take one of the poles that are the same length. Insert the plastic cap end from one bottom corner to the opposite top corner, feeding it through the gaps in the channel. There should be a pin attached to the bottom corner, push this pin up the inside of the metal end of the pole.
Repeat with the other pole.
Now take the longer pole (plastic cap at both ends), feed it under the two fitted poles (where the gap is). Now place the ends inside the small pockets by at the edge of canvas, by bending the pole.
Peg out as required.
Hope that helps.
Mike
|
Topic: suncamp scenic plus awning
