Message Forums

Help please I have the above van,one of the front thermal blinds has a fitment that allows it to lock into the hold down position missing. The fitment in the side of the blind is black and oblong in shape. I would say it sticks out about a 10mm. I have searched locally but to no avail.I can get a black oval piece and a white piece with three prongs on it.Neither of which work. Any suggestions please as too a possible supplier.

Thanks Taff

Hi Taffcop,

I just got one of these from ebay....

http://rover.ebay.com/rover/1/710-5232-2978-1/1?AID=9479574&PID=1428744&mpre=http://cgi.ebay.co.uk/CARAVAN-MOTORHOME-REMIS-BLIND-END-INSERT-RIGHT_W0QQitemZ180218093008QQihZ008QQcategoryZ36798QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem&mkcid=1&mkrid=710-53481-19255-0&siteid=3&campid=5339172918&customid=&toolid=10001&mkevt=1

They come in a left and right versions, be sure to check which one you need as i got a "right" version as the one I needed was on the right...seemed logical, unfortunately they must be marked from the front as i needed a "Left". Your existing ones should be marked L or R. Or of course get one of each as they dont cost a lot.

Cheers

Toughsj