Joined: 02/12/2003 Diamond Member 
Forum Posts: 4375
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
The 2000S is just another 1800 series heater so the controls are the same as the 1800,1800M, S or SC.
Hopefully someone has a copy of one of these manuals?
One difference is the Piezo igniter is separate and to the side of gas the control knob on some models and built into the control knob on later models.
If you only have the knob, turn the knob off stop and press down, continue turning while still holding down until knob drops a little further into a slot, release and repeatedly press again to get a spark.
The point is, all these fires only light when in the slot, the ignition position marked on the dial is often out of position so of little help.
On models with separate piezo it's the same as above but it's easier, once the gas control knobs dropped into the slot you can hold it there while pressing the separate piezo until it lights.
|
Topic: instructions for a trumatic heater
