Joined: 02/12/2003 Diamond Member 
Forum Posts: 4375
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
The main problem is air being sucked in with the water from outside or I found in my case, a restriction in the outlet from the internal tank.
Air causes 'cavitation', (you mentioned boats?), in the pump head and this noise is amplified by the floor if the pump is not mounted correctly.
This has to be rare but I also found my internal tank connections bore was just 6mm diameter!! this made it impossible for the pump to get enough water to satisfy it's abilities, increasing the bore to 10mm sorted that out.
Placing the pumps mounting board on a piece of breathable groundsheet stopped the amplification and once I cured the air leak the pump is now all but silent.
Another possible cause of noise is semi rigid pipework vibrating on whatever it's touching, again though getting rid of the air should also cure this.
|