Message Forums

Depends on the actual control box and which handset it uses, I only know for sure about the older angular plain grey or black handsets, not the later two tone rounded ones.However this could work for at least some of the later type?

For the early ones , press the reset button on the control box, (2-3 seconds and you may need a Biro tip to reach it), until the green led flashes.

Now switch the handset on with a double click, the control box will now search for the handset and click all the relays when it finds it.

Job done.

if that does not work ring this guy he fits motor movers.

MCS = 01772 619082 PRESTON 07729 334167

Thanks for your replies

Hats off to truma.I emailed them at 8.50 this morning with my request and at 9.10 i recieved an email with instructions.

An old motor mover from a previous company and still good customer service.

     Hello unique0151,

                              Would you care to share the wisdom from Truma.

HI

The instructions were as above but after you have turned the handset on press the forward button twice.

Job done!!