Joined: 30/6/2002 Diamond Member 
Forum Posts: 23517
| Site Reviews Total: | 1 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
could be one the hartel locks see
http://www.ukcampsite.co.uk/chatter/search.asp?search=door+lock&searchMode=allwords&searchIn=Topic&forum=31&searchSort=dateDESC&Submit=Start+Search
hi i had the same problem its easily sorted you need to take the handle apart and slightly enlarge the hole where the spindle goes through to the inside handle i did it with some 240 grade sand paper rolled into a tube and then lubricated the spindle with graphite powder. i think its quite a common problem with hartel door locks mine started to stick almost from new and it took a few attempts until i found the cause of the problem. copied from a previous post
Post last edited on 10/10/2009 18:08:27
-------------
the only silly question is the one you do not ask.
|
Topic: Dodgy Doolock
