Message Forums

c-200 model the flush has stopped working(no power to it).We found 1 fuse and changed that but still not working.

On looking in the owners handbook at the trouble shooting page it says to to "check cassette safety sensor and fuse-holder for proper engagement and operation,cassette has to be removed to reach switch and fuse"But we can"t see it, and on the diagram in the book it is the only thing not shown .

Can anyone help?

thanks lorna

try here  http://www.thetford.com/HOME/PARTS/PermanentToilets/tabid/331/Default.aspx

and of course make sure your 12volt supply is switched on

see

toilet wont flush

check this out ...3 amp glass fuse holder has pictures for renewal instructions

http://www.thetford-europe.com/web/show/id=51498/langid=42

i found this diagram too ..hope it helps seems like the fuse to the flush valve is blown or a wire off

http://www.thetford.com/HOME/PARTS/PermanentToilets/CassetteC200SCSParts/tabid/646/Default.aspx

Thanks everyone shall get the OH to have a look at the different recommended sites/diagrams to see if it helps him .

lorna

if the fuse and switch are ok it could be the electric valve at fault.see 4

Quote: Originally posted by Rune Caster on 21/4/2010

---

Good diagram Michael but like all Thetford diagrams it doesn't mean much because you can't see where the part is when it is fitted.


perry1 are you sure there is no power to it or is there power and the pump is gone?

---

I had a similar problem with the Pegasus on its first outing this Easter, checked the fuse, checked for loose connections etc. but toilet pump still didn't work, eventually found the problem. The switch unit was not seated properly on to its plastic cradle, I only discovered this by peeling back the plastic film on which the blue flush button is printed, clicked the switch unit back on to its cradle and replaced the self adhesive plastic cover, it then  worker perfectly.

Peter