Pictures not very clear,,,,you say there are two electric leads and what looks like a knob that say low pressure cut off,,,,,where do these two wires come from ??.
------------- Think this year is to follow old meet friends for 2014.
If you cant do someone a good turn,don`t do them a bad one,its nice to be nice you know,and little things mean much more later in life.
Pete.
The picture you show of the whale water inlet is the one without the pressure switch - they use the same moulding for both units, also you'll find that your one only has 2 spade contacts while the one equipped with the pressure switch has 3.
So either you have got micro switches on the taps or somewhere between the inlet and the Tee off for the water heater you have a pressure switch like the one posted earlier
had another look it does have the 2 spade fittings and not the 3 checked the rest of pipe work i have a valave that goes to the on board tank and when i follow the other pipes ther is a joint with a screw cap but no electrics to it
Have you checked under the taps for ay wires,if they have Micro switches you wont see any wires,the Micro switches are under the hot and cold knobs,and the wires go through the tap unit,
------------- Think this year is to follow old meet friends for 2014.
If you cant do someone a good turn,don`t do them a bad one,its nice to be nice you know,and little things mean much more later in life.
Pete.
there are no wires at all pete. if i open the valve for on board tank the external pump stays on until it says tank is full on my control panel then turns off , but if i shut valve off to on board tank the pump keeps running and the control panel says none does this mean icant just run on external pump and must always use onboard tank and internal pump thanks for your help
Sorry shaf, I have no idea now,two pumps ?? I hope some with a simuler set up can come along and help you.
------------- Think this year is to follow old meet friends for 2014.
If you cant do someone a good turn,don`t do them a bad one,its nice to be nice you know,and little things mean much more later in life.
Pete.
what do you mean when you say you shut the valve off to the onboard tank?ours turns off itself when its full ,then runs from the inboard tank,we only press the button to refill the inboard tank when its empty ,the inboard pump takes over automatically
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.
Topic: help with water pump
