Joined: 26/5/2005 Diamond Member 
Forum Posts: 1549
| Site Reviews Total: | 3 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi camperdoodles,Had same problem last year on my water heater, heater full with water no ignition to gas, gas took about 60seconds to charge all the gas pipes,lit cooker burner to make sure gas flowing ok, then switched on heater switch and the light turned green, Make sure heater full of water, turn gas on, check that the gas knob to heater is open wait about 60seconds, then switch on heater switch on the panel, the light should turn green indicating that the gas is lit, and heating water,hope this helps.
-------------
If everything runs smoothly then I must have done something wrong
If in Doubt Check it Out.
John
|
Topic: Cascade 2 problem
