Message Forums

Hi

I've got a 2007 Bailey Ranger 550/6 with alloy wheels but not sure if my chassis has the needed receiver attached to it, how can I tell?

Does anyone have the reciever on their caravan that could email / post a picture so I know where / what to look for.

Thanks
Neil

If you look at the wheel on the door side of the van, at about 2 o'clock there should be a tube with a yellow cover screwed into it.

I've not got access to my van at the moment, but if you take a picture, I'll let you know if I can tell.

Many thanks

I took these last night, they are the door side from behind and in front of the wheel. There is also a motor mover there.

I also know there are 2 options for the alko lock, 1 if you have a receiver, 1 if you have something already punched out, and 1 of you have nothing at all?

http://www.enticom.co.uk/caravan-1.jpg

http://www.enticom.co.uk/caravan-2.jpg

Hi

Unfortunately not. I'm going to bring it home from storage tomorrow for a clean so I'll check then.

Thanks for you help though.

Neil

I couldn't see a receiver plate either but it may have been the angle of the shot.

You should be able to see it looking at the wheel, its usually visible through the spokes of the alloy wheel. They only fit it on the near side of the caravan.

Dave

It is aat about 3 o'clock on the kerbside.

Thanks I'll take a look.

I'll check the insurance as I know the ALKO gave me a 20% discount as it was Sold Secure Diamond.

Regards
Neil