You need to check what the maximum amperage is that the site allows per pitch. Many allow only 10 amps so you can't run eveything Water heater 3.9 amps Fire - depends on what wattage you have it set on. Divide that by 230 and that gives you the amps The sockets....what are you running off those? If its an electric kettle that may be drawing a lot of amps. We use a gas boiling kettle for that reason. If the site only permits 10 amps you may need to turn something off when switching something new on. Once the water has heated up that can be turned off if you pop the electic kettle on. Turn fire down to 500 watts. Microwave, whilst using low amperage, can use a lot when first switched on. Get yourself a list of every piece of electrical gear, check its wattage and divide by 230 to work out what amps it draws and then you will know what combinations you can have on without tripping. Failing that you may have a wiring problem if not with the van, perhaps with some appliance you have bought from home. Phil
-------------
If you're not on a fell your wasting your feet and for 2014 it's.......Feb Castleton Mar North Yors Moors; Apr Sutton on Sea; May Thirsk; Jun Clapham/Riverside (Lakes); July Wharfedale; August Crakehall; Sept Knaresborough; Oct Wirral Park/Clitheroe
|
Topic: Elddis Odyssey 550
